Y0.08Sr0.92FexTi1-xO3-δ perovskite for solid oxide fuel cell anodes

초록

A single phase perovskite Y0.08Sr0.92FexTi1-xO3-delta (x = 0.05, 0.1,0 0.20, 0.25, 0.40, and 0.50) was fabricated at 1400 degrees C in air by a solid state reaction method and its electrical conductivity and electrochemical properties as an anode were investigated as a function of the Fe content. Doping with Y for Sr allowed the SrFexTi1-xO3-delta perovskite to be stable at 800 degrees C in a reducing atmosphere. At 900 degrees C, metallic Fe precipitated and the stability of the perovskite phase under a reducing atmosphere decreased as the Fe content increased. The conductivity of Y0.08Sr0.92FexTi1-xO3-delta (x = 0.40) was greater than that of the x = 0.20 sample. The conductivity of Y0.08Sr0.92FexTi1-xO3-delta was found to be 2 x 10(-1) Scm(-1) at 800 degrees C in H-2. Sintering the Y0.08Sr0.92FexTi1-xO3-delta anode at 1200 degrees C was found to be optimum to obtain not only good interfacial adhesion, but also a fine grain structure. The Y0.08Sr0.92Fe0.25Ti0.75O3-delta anode exhibited the lowest polarization resistance (0.7 and 1.8 Omega cm(2) at 800 and 700 degrees C). (C) 2011 Elsevier B.V. All rights reserved.

키워드