Treatment of oily wastewater using membrane with 2-hydroxyethyl methacrylate-modified surface

Citations

WEB OF SCIENCE

6
Citations

SCOPUS

8

초록

To enhance the hydrophilicity, the surface of polysulfone membrane was modified by UV-irradiation induced coating of HEMA in the presence of AIBN as free radical source. The permeation characteristics of oily water through the surface-modified membrane were investigated. The fluxes of wastewater with oil concentrations of 100 ppm, 200 ppm and 400 ppm through an un-coated membrane were 0.123, 0.081, and 0.076 g/cm(2).min, respectively. However, the fluxes through the surface-modified membrane were 0.253, 0.242, and 0.173 g/cm(2).min, respectively. The fluxes through the surface-modified membrane were much higher than those through an un-coated membrane: 2.1, 3.0 and 2.3 times higher fluxes. The rejection of oil emulsions by the membrane was higher than 99%. The membrane with HEMA-modified surface, which has a higher flux and less fouling than an original polysulfone membrane, may be a promising candidate for wastewater treatments as well as oily wastewater treatments.

키워드

hydrophilicitypolysulfone membraneHEMAUV coatingULTRAFILTRATIONMICROFILTRATIONEMULSIONSREMOVAL
제목
Treatment of oily wastewater using membrane with 2-hydroxyethyl methacrylate-modified surface
저자
Song, Kun-HoLee, Kwang-Rae
DOI
10.1007/s11814-007-5020-5
발행일
2007-01
유형
Article
저널명
Korean Journal of Chemical Engineering
24
1
페이지
116 ~ 120