판재의 성형한계 결정을 위한 시간의존적 방법의 제안

초록

Most domestic and international standards on the forming limit diagram (FLD) including ISO 12004-2, use a ‘position-dependent method,’ which determines the forming limit from a strain distribution measured on the specimen after necking or fracture. However, the position-dependent method has inherent problemssuch as the incidence of asymmetry of a strain distribution, the estimation of missing data near fracture, the termination time of test, and the deformation due to the new stress equilibrium after a fracture, which is blamed for causing sometimes a significant lab-to-lab variation. The ‘time-dependent method,’ which is anticipated to be a new international standard for evaluating the forming limit, is expected to greatly improve these intrinsic disadvantages of the position-dependent method. It is because the time-dependent method makes it possible to identify and accurately determine the forming limit, just before the necking point from the strain data as continuously measured in a short time interval. In this study, we propose a new time-dependent method based on a Gaussian fitting of strain acceleration with the introduction of ‘normalized correlation coefficient.’ It has been shown in this study that this method can determine the forming limit very stably and gives a higher value, which is in comparison with the results of the previously studied position-dependent and time-dependent methods.

키워드