Electrospinning and electrospraying of polybutylene succinate/esterified cellulose nanofibril composites

초록

Cellulose nanofibrils (CNF) were esterified using long-chain fatty acid chlorides (octanoyl chloride, lauroyl chloride, and palmitoyl chloride) and composited with a biodegradable polymer, polybutylene succinate (PBS). The composite material was fabricated into nano-scale fibers and films via electrospinning and electrospraying processes using chloroform as a solvent. The influence of process conditions, CNF type and CNF amount on morphologies were investigated. The diameter of the electrospun fibers was ranged from 648 to 975 nm and fibers with the lowest diameters were produced at 10% concentration, 15 kV voltage and 30 mu L/min flow rate. Further, PBS to CNF ratio of 95/5 and CNF esterified with lauryl chloride produced the best results. Electrospraying was achieved at a concentration of 5% or less and the tensile properties of the resulting electrosprayed films were investigated. The highest increase in tensile strength was observed at a PBS to CNF ratio of 99/1, while the most significant enhancement in elastic modulus occurred at the 95/5 ratio.

키워드