Development of Digital Device Using ZigBee for Environmental Monitoring in Underground Mines

초록

In underground mines, various mining activities may generate dust or vibrations, affecting workers' health and safety. Therefore, for worker safety, we must monitor the environment and identify possible risks. However, it is difficult to install multiple sensors and acquire data simultaneously because of the difficulties of connecting to an external network in underground mines. This study developed a digital device to share acquired data by combining ZigBee communication technology with an accelerometer and dust sensor. In total, 29 vibration modules, 14 dust modules, and 2 coordinator modules were installed at Taeyoung EMC's Samdo Mine in Samcheok, Republic of Korea. Because of its application, we could detect changes in vibration and dust before and after blasting. The dust density of the devices close to the blasting point increases rapidly up to about 230 mu g/m(3) and then decreases to about 180 mu g/m(3), and the dust density of the devices further increases over time. The dust density was usually maintained at a value of about 100 to 150 mu g/m(3) before blasting. The spatial distribution of the dust density of multiple devices was visualized using ArcGIS Pro. Although the wireless sensor network is well-established, some modules were temporarily disconnected from the network. In order to solve the problem of unstable network connection in some modules, change of network settings and line of sight analysis are required. Improvements in the technology developed in this study may help prevent potential hazards in underground mines.

키워드