Investigation of the Physical Properties of Plasma Enhanced Atomic Layer Deposited Silicon Nitride as Etch Stopper

  • Kim, Harrison Sejoon; 
  • Meng, Xin; 
  • Kim, Si Joon; 
  • Lucero, Antonio T.; 
  • Cheng, Lanxia; 
  • 외 10명
Citations

WEB OF SCIENCE

39
Citations

SCOPUS

38

초록

Correlations between physical properties linking film quality with wet etch rate (WER), one of the leading figures of merit, in plasma enhanced atomic layer deposition (PEALD) grown silicon nitride (SiNx) films remain largely unresearched. Achieving a low WER of a SiNx film is especially significant in its use as an etch stopper for technology beyond 7 nm node semiconductor processing. Herein, we explore the correlation between the hydrogen concentration, hydrogen bonding states, bulk film density, residual impurity concentration, and the WERs of PEALD SiNx using Fourier transform infrared spectrometry, X-ray reflectivity, and spectroscopic ellipsometry, etc. PEALD SiNx films for this study were deposited using hexachlorodisilane and hollow cathode plasma source under a range of process temperatures (270-360 degrees C) and plasma gas compositions (N-2/NH3 or Ar/NH3) to understand the influence of hydrogen concentration, hydrogen bonding states, bulk film density, and residual impurity concentration on the WER. Varying hydrogen concentration and differences in the hydrogen bonding states resulted in different bulk film densities and, accordingly, a variation in WER. We observe a linear relationship between hydrogen bonding concentration and WER as well as a reciprocal relationship between bulk film density and WER. Analogous to the PECVD SiNx processes, a reduction in hydrogen bonding concentration arises from either (1) thermal activation or (2) plasma excited species. However, unlike the case with silane (SiH4)-based PECVD SiNx, PEALD SiNx WERs are affected by residual impurities of Si precursors (i.e., chlorine impurity). Thus, possible wet etching mechanisms in HF in which the WER is affected by hydrogen bonding states or residual impurities are proposed. The shifts of amine basicity in SiNx due to different hydrogen bonding states and the changes in Si electrophilicity due to Cl impurity content are suggested as the main mechanisms that influence WER in the PEALD processes.

키워드

hydrogen bonding state; hydrogen/chlorine content; bulk film density; wet etch rate (WER); silicon nitride; atomic layer deposition (ALD); plasma-enhanced ALD (PEALD); hexachlorodisilane (HCDS); CHEMICAL-VAPOR-DEPOSITION; LOW-TEMPERATURE; HYDROGEN CONTENT; THIN-FILMS; ALTERNATING EXPOSURES; MECHANICAL-STRESS; GLOW-DISCHARGE; SI-N; PRESSURE; SI2CL6
제목
Investigation of the Physical Properties of Plasma Enhanced Atomic Layer Deposited Silicon Nitride as Etch Stopper
저자
Kim, Harrison Sejoon; Meng, Xin; Kim, Si Joon; Lucero, Antonio T.; Cheng, Lanxia; Byun, Young-Chul; Lee, Joy S.; Hwang, Su Min; Kondusamy, Aswin L. N.; Wallace, Robert M.; Goodman, Gary; Wan, Alan S.; Telgenhoff, Michael; Hwang, Byung Keun; Kim, Jiyoung
DOI
10.1021/acsami.8b15291
발행일
2018-12-26
유형
Article
저널명
ACS Applied Materials & Interfaces
권
10
호
51
페이지
44825 ~ 44833